Toll Free: 844-409-1131

Wind Resistant Sign Holders with Spring Legs

Browse All Products

STREET-MASTER Wind Stand with Slide-In Frame and Flexible Spring Feet (for 24” x 36” Posters)

From $199.00

  • Wind Sign Stand with Flexible Spring Feet
  • Advertise with a big impact on the streets
  • Safety corners guarantee maximum safety on the pavement.
  • Quick-Changing, Slide-In top frame to easily allow a quick change.
  • Fits TWO 24" Wide x 36" High Posters
  • Viewable Area: 23.68" Wide x 35.68" High
  • Base wing span on this display is 27.12" Wide x 36.22" High
  • Overall Height: 50.6"
  • Two-sided viewing
  • It consists of 2 main articles; the frame and feet unit which supports the legs of the product.
  • Finish: Black and Silver
  • The spring connectors stabilize the position of poster
  • Suitable for windy conditions.
  • Poster inserted should be printed for outdoor use (consult your printer or local sign company)
  • Slide-In Frame System will accepts posters up to 1/16" thick
  • Two Non-Glare Overlays are included to protect your graphic.
  • A dual spring base to support the curb sign against wind less than 30 mph without tipping over.
  • Some Basic Tools Are Required.
  • Single packed with an easy-to-understand instruction sheet!

Outdoor Snap Frame Curb Sign Holders (for 28x44 Posters)

From $201.00

  • Sidewalk Sign Holder
  • Durable Outdoor Sign Stand
  • Wind resistant sidewalk curb sign holder with Spring Legs
  • Quick-Changing, all 4 frame rails snap open for easy poster changes
  • Frame Fits 28x44 Posters / Signs
  • Two-sided design (can display 2 different posters)
  • 2 Frame Finishes: Gloss Black & Satin Silver
  • Frame Rail Width: 1 3/4"
  • Weather-treated aluminum construction
  • Dual Spring steel base is powder-coated for weather resistance
  • Backing Board: White Aluminum withstands typical everyday weather
  • Accepts printed materials up to 1/32" thick
  • No Tools Required!

Wind Proof Outdoor Panel Curb Sign Stand Signholder

From $130.00

  • Aluminum construction
  • Finish: Gloss Black
  • Dual-spring, rust resistant steel base
  • No Tools Required!
  • Uses economical 10 mil fluted polypropylene panel, sold separately

Common Panel Sizes: 28" x 44" | 36" x 55"

Outdoor Wind Proof Snap Frame Curb Sign Holder with Legs (for 28x44 Posters) Frame w Rounded Corners

From $275.00

  • Outdoor Sign Stand
  • Wind Proof Pavement Sign Holder
  • Flexes to withstand strong wind gusts
  • Holds 28x44 Posters
  • Sleek, contemporary styling
  • Snap Frame
  • Side frame rails snap open to load poster
  • The top frame is completely enclosed for added moisture resistance
  • Aluminum construction with Radius Corners eliminates corner points
  • Frame Finish: Gloss Black
  • Dual-spring, rust resistant steel base comes in Black only
  • Dent-resistant fluted Polypropylene back
  • Curb Stand with Rust Proof Legs
  • No Tools Required!
  • Weather Resistant and Designed for Outdoor Use

22x28 Top Loading Outdoor Wind Proof Curb Sign Stand with Legs

From $187.00

  • Sidewalk Sign Stand
  • Top Loading Outdoor Sidewalk Curb Sign Holder
  • Displays 22x28 Posters
  • Flexes to withstand strong wind gusts
  • Quick-Changing, Top Loading Frame Format
  • Unit is double-sided and posters slide in through top of frame
  • All Aluminum construction Finish: Black
  • Legs with Dual-springs, featuring a rust-resistant base
  • Backing Board: White Fluted Polypropylene
  • Curb Sidewalk Sign Stand 22x28 Designed for Outdoor Use

Outdoor Heavy Duty Snap Frame Curb Sign Holders (for 28x44 Posters)

From $329.00

  • Outdoor Sidewalk Sign Holder Stand
  • Heavy Duty Sign Stand
  • Snap Open Poster Frames
  • Quick-Changing, all 4 frame rails snap open for easy poster changes
  • Two-sided design (displays 2 separate posters)
  • Fits posters 28 x 44
  • 2 Frame Finishes: Gloss Black & Satin Silver
  • Frame Rail Width: 1 3/4"
  • Accepts printed materials up to 1/32" thick
  • Weather-treated aluminum construction
  • Flexes to withstand strong wind gusts
  • Rust free steel dual springs
  • Backing Board: Fluted Polypropylene
  • Gray base can be filled with water or sand to withstand wind gusts
  • Built-in wheels will allow the unit to be tipped and rolled
  • No Tools Required!

Snap Frame Sign Holder Poster Display (2-Sided) for 22x28 Posters

From $195.00

  • Poster Floor Stand
  • Snap Open Poster Display Sign Holder
  • Quick-Changing Front Loading
  • Fits 22x28 Posters
  • Aluminum construction with Radius Corners
  • 2-leg post design for added stability
  • Two-sided design, displays 2 separate posters on each side.
  • 2 Metal Finishes: Gloss Black or Satin Silver
  • Strong lightweight overlay provides a clear viewing window
  • Backing Board: White Fluted Polypropylene
  • No Tools! All four frame sides snap-open easily by hand
  • Snap Frame Sign Stands for Indoor Use Only

STREET-MASTER™ Pavement Sidewalk Sign with Flexible Spring Feet (for 30” x 40” Banners)

From $110.50

  • Wind Sign Stand with Flexible Spring Feet
  • Advertise with a big impact on the streets
  • PRINT BANNER ON VINYL MATERIAL TO MAKE YOUR BANNER WATER RESISTANT!
  • O-RINGS provide security to your banners.
  • Frame and legs are finished with stain free outdoor powder coating.
  • Fits ONE 30" Wide x 40" High Vinyl Banners - 2 SIDED
  • Leave at least 1 1/4" Border ALL-AROUND the Banner to allow for O-Rings
  • Base wing span on this display is 27.16" Wide x 42.12 Deep
  • Overall Height: 54.6"
  • Two-sided viewing
  • It consists of 2 main articles; the frame and feet unit which supports the legs of the product.
  • Finish: Black or Silver
  • The spring connectors stabilize the position of poster
  • Banner inserted should be printed for outdoor use (consult your printer or local sign company)
  • A dual spring base to support the curb sign against wind less than 30 mph without tipping over.
  • Some Basic Tools Are Required.
  • Single packed with an easy-to-understand instruction sheet!

STREET-MASTER™ Pavement Sidewalk Sign with Flexible Spring Feet (for 24” x 36” Banners)

From $103.50

  • Wind Sign Stand with Flexible Spring Feet
  • Advertise with a big impact on the streets
  • PRINT BANNER ON VINYL MATERIAL TO MAKE YOUR BANNER WATER RESISTANT!
  • O-RINGS provide security to your banners.
  • Frame and legs are finished with stain free outdoor powder coating.
  • Fits ONE 24" Wide x 36" High Vinyl Banners - 2 SIDED
  • Leave at least 1 1/4" Border ALL-AROUND the Banner to allow for O-Rings
  • Base wing span on this display is 27.16" Wide x 42.12 Deep
  • Overall Height: 50.6"
  • Two-sided viewing
  • It consists of 2 main articles; the frame and feet unit which supports the legs of the product.
  • Finish: Black or Silver
  • The spring connectors stabilize the position of poster
  • Banner inserted should be printed for outdoor use (consult your printer or local sign company)
  • A dual spring base to support the curb sign against wind less than 30 mph without tipping over.
  • Some Basic Tools Are Required.
  • Single packed with an easy-to-understand instruction sheet!

STREET-MASTER Wind Stand with Slide-In Frame and Flexible Spring Feet (for 22” x 28” Posters)

From $156.50

  • Wind Sign Stand with Flexible Spring Feet
  • Advertise with a big impact on the streets
  • Safety corners guarantee maximum safety on the pavement.
  • Quick-Changing, Slide-In top frame to easily allow a quick change.
  • Fits TWO 22" Wide x 28" High Posters
  • Viewable Area: 21.68" Wide x 27.68" High
  • Base wing span on this display is 27.16" Wide x 36.22" Deep
  • Overall Height: 42.6"
  • Two-sided viewing
  • It consists of 2 main articles; the frame and feet unit which supports the legs of the product.
  • Finish: Black and Silver
  • The spring connectors stabilize the position of poster
  • Suitable for windy conditions.
  • Poster inserted should be printed for outdoor use (consult your printer or local sign company)
  • Slide-In Frame System will accepts posters up to 1/16" thick
  • Two Non-Glare Overlays are included to protect your graphic.
  • A dual spring base to support the curb sign against wind less than 30 mph without tipping over.
  • Some Basic Tools Are Required.
  • Single packed with an easy-to-understand instruction sheet!

Top Loading Outdoor Wind Proof Curb Sign Stand with Wheels (for 22x28 Posters)

From $223.00

  • WindProof Sign Stand
  • Top Loading Outdoor Sidewalk / Curb Sign Holder
  • Holds 22 x 28 Poster Sizes
  • Flexes to withstand strong wind gusts
  • Unit is double-sided and posters slide in through top of frame
  • Quick-Changing, Top Loading Frame Format
  • All Aluminum construction
  • Finish: Black
  • Built-in wheels roll for easy moving
  • Backing Board: White Fluted Polypropylene
  • Optional: Clear Protective Overlays for Posters
  • Wind Resistant Curb Stand 22x28 Designed for Outdoor Use

Snap Open Display Floor Stand | 2-Sided Frame for 22x28 Poster Sizes

From $159.00

  • Poster Snap Frame Sign Holder FloorStand
  • All frame rails snap open to front load posters
  • Holds 22x28 Posters
  • Aluminum construction with Mitered Corners
  • Finish: Satin Silver
  • Backing Board: White Fluted Polypropylene
  • Two-sided design, displays 2 separate posters on each side.
  • Floor Standing Snap Frame Sign Holder for Indoor Use Only

Extra Large Outdoor Curb Sign Holder with Snap Frames 41 x 55 Poster Size

From $611.00

  • Wind resistant sidewalk curb sign holder
  • Quick-Changing, all 4 frame rails snap open for easy poster changes
  • Fits 41x55 Posters
  • Two-sided design (can display 2 separate posters)
  • (2) Frame Finishes: Gloss Black & Satin Silver
  • Frame Rail Width: 1 3/4"
  • Weather-treated aluminum construction
  • Dual Spring steel base is powder-coated for weather resistance
  • Backing Board: White Coroplast withstands all weather
  • Accepts printed materials up to 1/32" thick
  • No Tools Required!