Water Base Sign Holders - Weighted Pavement Signs with Fillable Bases

• The Parker Sidewalk Sign Holder
• Plastic Fillable Base Sidewalk Sign
• Budget friendly Pavement Sign or Parking lot Sign
• Overall Height: 44"
  
• Suitable for Indoor or Outdoor Use
• When empty, cone sign holder is 4 LBS
• Fillable Base- use water or sand to increase the weight up to 16 LBS
• Stable, Heavy, Durable Base: 14.5" x 14.5
• Suitable for Ink Jet printing, Vinyl Lettering, or Adhesive Posters OR simply Tape your poster to the A-Board
  
• Each Board Side fits a graphic 13.23" Wide x 15.24" High
  
• Two-sided viewing
• Sidewalk Sign Design is made of Polystyrene Plastic
• Finish: Gray Plastic
• When used outdoors weatherproof poster materials are recommended
• No Tools Required.
• Single packed with an easy-to-understand instruction sheet!

• Plastic Fillable Base Sidewalk Sign Holder
  
• Steel Shock Springs flex for wind gusts
  
• Double Sided Sign Stand
  
• Two Separate Aluminum Snap Open Frames
• Quick-Changing, all 4 frame rails snap open for easy poster changes
• Safety corners guarantee maximum safety on the pavement.
• Fits TWO 24" Wide x 36" High Posters
  
• Viewable Area: 23.8" Wide x 35.8" High
• Snap Open Frame System will accepts posters up to 1/16" thick
• Water Wick (Rubber Seal) around the Frame Protects Posters against inclement weather
• Poster inserted should be printed for outdoor use (consult your printer or local sign company)
  
• Stable, Heavy, Durable
  
• Suitable for Indoor or Outdoor Use
• Fillable Base- use water or sand to make base heavier
  
• Curb Sign Base is made of Polystyrene Plastic
• Finish: Black or Silver
• Two Non-Glare Overlays are included to protect your graphic.
• Assembly Tools Included
• Packed with an easy-to-understand instruction sheet!

• Single Post Portable Sidewalk Sign Holder
• Plastic Fillable Base Sidewalk Sign
• Budget friendly Sign Stand is ideal for Traffic, Safety, Parking Signs and more
  
• Stable in wind gusts up to 30 - 40 MPH
• In the event of higher winds, bring sign in.
  
• Suitable for Indoor or Outdoor Use
• Fillable Base- use water or sand to increase the weight up to 25 LBS
• Stable, Heavy, YELLOW Durable Base: 18" Diameter x 12" in Height
  
• Large 3" Wheels allow for easy moving over rough pavement or up and down steps
• BLACK Single Post Options: 48" or 58" in Height
• Pre-Drilled Holes Accepts Sign Panels 9" x 12" to 24" x 24", and 12" x 36"
• Stabilizing mounting plates keep sign panels from wobbling in the wind
• SIGN PANELS NOT INCLUDED
• Two-sided viewing
• Sidewalk Base is made of Technopolymer Plastic which is ding & rust-proof
• Finial on top of pole provides a comfortable handle for moving around
• No Tools Required, sets up in 60+ Seconds
  
• Single packed with an easy-to-understand instruction sheet!

• STREET MASTER™ Pavement Sign Holder
• Wind Sign Stand with Fillable Water Base
  
• Advertise with a big impact on the streets
  
• Safety corners guarantee maximum safety on the pavement.
• Quick-Changing, Slide-In top frame to easily allow a quick change.
• Fits TWO 30" Wide x 40" High Posters
• Viewable Area: 29.7" Wide x 39.68" High
  
• Two-sided viewing
• It consists of 2 main articles; the frame and base unit which supports the legs of the product.
• Finish: Black and Silver
• The spring connectors stabilize the position of poster
• Suitable for windy conditions.
• Poster inserted should be printed for outdoor use (consult your printer or local sign company)
  
• Slide-In Frame System accepts posters up to 1/16" thick
• Two Non-Glare Overlays are included to protect your graphic.
• Fillable Water base weighs 77 Lbs when full
  
• Weighted Base supports the curb sign stand against high wind gusts.
• Some Basic Tools Are Required.
• Single packed with an easy-to-understand instruction sheet!

• PATENTED PRODUCT WITH PATENT PENDING FEATURES
• Sidewalk Sign Rolling A-Frame White Message Board
• Outdoor Changeable Letters Board. Simply lift out sign panel, and slide in new sign.
• 2 Sided White Message Board 24" x Wide x 36" High
• Overall Size of Sidewalk Sign: 32" Wide x 41" High x 24" Deep
• Includes TWO 24” Wide x 36” High plastic White sign faces
• 7 lines of letter tracks included on both White panels
• Resistant up to 30 MPH wind
• Set of 314 characters included- 4" letters, numbers and symbols.
  
• Message Board thickness: 4mm (3/16")
• Black Letters and Red Numbers Included
• Durable Rustproof Techopolymers Plastic Stand
• EASY TO MOVE!
  Black Sign uprights, both with wheels.
  Recessed wheels sit above ground level, and engage only when sign is tipped for rolling.
• 3 black plastic cross tubes support the sidewalk sign
• Fill base with water or sand for added stability

• PATENTED PRODUCT WITH PATENT PENDING FEATURES
• Sidewalk Sign Rolling A-Frame Poster
• Holds Poster A-Boards and Sign Boards; on 2-Sides
• Accepts TWO 24” Wide x 36” High Poster Inserts (not included)
• Accepts MAX Poster Thickness: 4mm (3/16")
• Resistant up to 30 MPH wind
• EASY to MOVE Black Sign uprights, both with wheels
• Recessed wheels sit above ground level, and engage only when sign is tipped for rolling.
• (3) black plastic cross tubes
• Fill base with water or sand for added stability
• Can be used outdoors and indoors

**YOU PROVIDE YOUR OWN POSTERS

• Pavement Sign Holder
• Plastic Fillable Base Sidewalk Sign Holder
  
• Steel Shock Springs flex for wind gusts
  
• Double Sided Sign Stand
  
• Two Separate Aluminum Snap Open Frames
• Quick-Changing, all 4 frame rails snap open for easy poster changes
• Safety corners guarantee maximum safety on the pavement.
• Fits TWO 22" Wide x 28" High Posters
  
• Viewable Area: 21.8" Wide x 27.8" High
• Snap Open Frame System will accepts posters up to 1/16" thick
• Water Wick (Rubber Seal) around the Frame Protects Posters against inclement weather
• Poster inserted should be printed for outdoor use (consult your printer or local sign company)
  
• Stable, Heavy, Durable
  
• Standing Sign Holder Suitable for Indoor or Outdoor Use
• Fillable Base- use water or sand to make base heavier
  
• Curb Sign Base is made of Polystyrene Plastic
• Finish: Black or Silver
• Two Non-Glare Overlays are included to protect your graphic.
• Assembly Tools Included
• Packed with an easy-to-understand instruction sheet!

• Wind Sign Stand with Fillable Water Base
  
• 22x28 STREET MASTER™
• Advertise with a big impact on the streets
  
• Safety corners guarantee maximum safety on the pavement.
• Quick-Changing, Slide-In top frame to easily allow a quick change.
• Fits TWO 22" Wide x 28" High Posters
• Viewable Area: 21.68" Wide x 27.68" High
  
• Two-sided viewing
• It consists of 2 main articles; the frame and base unit which supports the legs of the product.
• Metal Finish: Black and Silver
• The spring connectors stabilize the position of poster
• Suitable for exterior windy conditions.
• Poster inserted should be printed for outdoor use (consult your printer or local sign company)
  
• Slide-In Frame System will accepts posters up to 1/16" thick
• Two Non-Glare Overlays are included to protect your graphic.
• Fillable Water base weighs 77 Lbs. when full to support the curb sign against high wind gusts.
  
• Some Basic Tools Are Required.
• Single packed with an easy-to-understand instruction sheet!

• Outdoor Sign Stand
• Tall and Slim Poster Snap Frame / Sign Frame
• Aluminum construction with Radius Corners
• Sleek, contemporary styling
• Weather-Resistant, Wind-Proof sidewalk curb sign holder
• Stand Fits Signs 18 x 56
• Side frame rails snap open to load sign or poster
• Frame Profile Width: 1 3/4"
• Frame Corner: Round (Black Finish)
• Frame Finish: Gloss Black
• Black molded base can store sand or water for weight
• Flexes to withstand strong wind gusts
• Built-in wheels roll for easy moving
• Dent-resistant fluted white polypropylene backer
• Two-sided design (can display 2 separate 18" x 56" posters)
• No Tools Required!
• Designed for Outdoor Use or for Indoor signage applications

• Wind Sign Stand with Fillable Water Base
  
• Advertise with a big impact on the streets
  
• Safety corners guarantee maximum safety on the pavement.
• Quick-Changing, Slide-In top frame to easily allow a quick change.
• Fits TWO 24" Wide x 36" High Posters
• Viewable Area: 23.7" Wide x 35.68" High
  
• Two-sided viewing
• It consists of 2 main articles; the frame and base unit which supports the legs of the product.
• Finish: Black and Silver
• The spring connectors stabilize the position of poster
• Suitable for windy conditions.
• Poster inserted should be printed for outdoor use (consult your printer or local sign company)
  
• Slide-In Frame System will accepts posters up to 1/16" thick
• Two Non-Glare Overlays are included to protect your graphic.
• Fillable Water base weighs 77lb when full to support the curb sign against high wind gusts.
  
• Some Basic Tools Are Required.
• Single packed with an easy-to-understand instruction sheet!

• High Quality Plastic Fillable Base Sidewalk Sign
• Has a double latching mechanism to prevent the sign board from falling off.
• Suitable for Indoor or Outdoor Use
• Aluminum Swinging Poster Panel with Poster Sleeve
• Magnetic Edged Poster Sleeve Protects Posters against inclement weather
  
• Fillable Base- use water or sand to increase the weight up to 37 LBS
  
• Each Board Side fits a graphic 22" Wide x 28" High
  
• Two-sided viewing
• Permanent Header is to be applied directly to the aluminum panel
• Available Header Area: 26.25" Wide x 5.75" High
• Fillable Sidewalk Base Design is made of Polystyrene Plastic
• Sign tubing is constructed of weather treated aluminum
• Finish: Black
• No Tools Required.
• Single packed with an easy-to-understand instruction sheet!
• Assembly is easy and practical.
  

• Rolling Portable Sidewalk Pole Sign
• Outdoor Sign Base and Pole
• Holds Your Signs From 9” x 12” Up to 24” x 24”
• Pole Height: 48”
• Pole Diameter: 2”
• Wind Resistant
• Durable Rustproof Techo Polymers Plastic Stand
• 24” Diameter Base
• Built In Wheels Roll Easily on most Surfaces
• Stability Mounting Plates
• 1 Set of Hardware with Nylon Loop Handle
• Double-Sided Sign Face assembles easily onto Durable Pole
• Pole Sign used outdoors and indoors

***(POSTERS / SIGNS NOT INCLUDED)

• ALL WEATHER Pavement Sign Holder
• Heavy Duty ROLLING Sidewalk Sign Holder
• Mitered Frame Corners come with a Safety Edge to prevent harm to the public
  
• Outdoor Heavy Duty Wind Resistant Sign/Poster Stand
• Finish: Grey rolling base, with Silver SNAP OPEN frame
• 2-Sided Viewing with SNAP OPEN Frame
• SNAP OPEN Frame for 30x40 printed posters
• Easily change posters or advertisements with 4 frame rails which snap open.
  
• Non-Glare Protective Overlays for Each Frame Side
• Aluminum Frame Construction
• Stable, Heavy, Durable
  
• Easily to move anywhere with the wheels and handle feature.
  
• Fillable Base: use water or sand to make base heavier
  
• Overall Pavement Stand Height: 57"
• Packed in 2 boxes (frame and base), with an easy-to-understand instructions

• Plastic A Board A-Frame Pavement Sign
• Budget friendly Sandwich Sign Board or Menu Board
  
• Suitable for Indoor or Outdoor Use
• When empty, lightweight A-Frame sign holder is 5 LBS
• Fillable Base- use water or sand to increase the weight up to 17 LBS
• Suitable for Ink Jet printing, Vinyl Lettering, or Adhesive Posters OR simply Tape your poster to the A-Board
• Sign Dimensions: 16.14" Wide x 29.7" High x 18.5" Deep
  
• Each Board Side fits a graphic 12.80" Wide x 22.44"
  
• Two-sided viewing
• Folding A Frame Design is made of Polystyrene Plastic
• Finish: Gray Plastic
• When used outdoors weatherproof poster materials are recommended
• No Tools Required.
• Single packed with an easy-to-understand instruction sheet!

**Please note that using markers on this board will leave permanent markings, this is not meant for markers.

• PATENTED PRODUCT WITH PATENT PENDING FEATURES
• Sidewalk Sign Rolling A-Frame White Deluxe Message Board
• Outdoor Changeable Letters Board. Simply lift out sign panel, and slide in new sign.
• 2 Sided White Message Board 24" x Wide x 36" High
• Overall Size of Sidewalk Sign: 32" Wide x 41" High x 24" Deep
• Includes TWO 24” Wide x 36” High plastic White sign faces
• 7 lines of letter tracks included on both White panels
• Resistant up to 30 MPH wind
• Set of 314+ characters included- 4" letters, numbers and symbols.
• Includes (22) - 8" jumbo numbers plus % (Red or Red/White)
• Includes (2) 9" (Double-Sided) "SALES/Special" Headers (Red)
• Message Board thickness: 4mm (3/16")
• Black Letters and Red Numbers Included
• Durable Rustproof Techopolymers Plastic Stand
• EASY TO MOVE!
  Black Sign uprights, both with wheels
  Recessed wheels sit above ground level, and engage only when sign is tipped for rolling.
• 3 black plastic cross tubes support the sidewalk sign
• Fill base with water or sand for added stability

• Wind Stand Sidewalk Sign Holder
• Wind Stand Outdoor Changeable Graphics Sign Board
• Size Board Size: 24” Wide x 36” High
• Poster Board NOT INCLUDED
• Requires adhesive Vinyl for your prints. (To stick to the Poster Board)
• Flexible Swinging Sidewalk Sign
• Overall Size of Sidewalk Sign: 24" Wide x 42" High x 18" Deep
• Resistant to 40 - 50 MPH wind
• Durable Rustproof Techno Polymers Plastic Stand
• For Extra Stability base can be filled with water or sand
• Built In Handle Holds Makes Lifting Sign Easy
• Dual Heavy Duty Galvanized Steel Springs
• Sign Face assembles easily onto Low Profile Durable Plastic Base
• Anti-Slide Feet Included
• Wind Stand Changeable Graphics Sign for Outdoor & Indoor Use

**SIGN BOARD NOT INCLUDED

• WindProof Sign Stand
• Top Loading Outdoor Sidewalk / Curb Sign Holder
• Holds 22 x 28 Poster Sizes
• Flexes to withstand strong wind gusts
• Unit is double-sided and posters slide in through top of frame
• Quick-Changing, Top Loading Frame Format
• All Aluminum construction
• Finish: Black
• Built-in wheels roll for easy moving
• Backing Board: White Fluted Polypropylene
  
• Optional: Clear Protective Overlays for Posters
  
• Wind Resistant Curb Stand 22x28 Designed for Outdoor Use

• Outdoor Sidewalk Sign Holder Stand
• Heavy Duty Sign Stand
• Snap Open Poster Frames
• Quick-Changing, all 4 frame rails snap open for easy poster changes
• Two-sided design (displays 2 separate posters)
• Fits posters 28 x 44
• 2 Frame Finishes: Gloss Black & Satin Silver
• Frame Rail Width: 1 3/4"
• Accepts printed materials up to 1/32" thick
• Weather-treated aluminum construction
• Flexes to withstand strong wind gusts
• Rust free steel dual springs
• Backing Board: Fluted Polypropylene
• Gray base can be filled with water or sand to withstand wind gusts
• Built-in wheels will allow the unit to be tipped and rolled
• No Tools Required!

• Single Post Portable Sidewalk Sign Holder
• Plastic Fillable Base Sidewalk Sign
• Budget friendly Sign Stand is ideal for Traffic, Safety, Parking Signs and more
  
• Stable in wind gusts up to 30 - 40 MPH
• In the event of higher winds, bring sign in.
  
• Suitable for Indoor or Outdoor Use
• Fillable Base- use water or sand to increase the weight up to 25 LBS
• Stable, Heavy, RED Durable Base: 18" Diameter x 12" in Height
  
• Large 3" Wheels allow for easy moving over rough pavement or up and down steps
• BLACK Single Post Options: 48" or 58" in Height
• Pre-Drilled Holes Accepts Sign Panels 9" x 12" to 24" x 24", and 12" x 36"
• Stabilizing mounting plates keep sign panels from wobbling in the wind
• SIGN PANELS NOT INCLUDED
• Two-sided viewing
• Sidewalk Base is made of Technopolymer Plastic which is ding & rust-proof
• Finial on top of pole provides a comfortable handle for moving around
• No Tools Required, sets up in 60+ Seconds
  
• Single packed with an easy-to-understand instruction sheet!

• Single Post Portable Sidewalk Sign Holder
• Plastic Fillable Base Sidewalk Sign
• Budget friendly Sign Stand is ideal for Traffic, Safety, Parking Signs and more
  
• Stable in wind gusts up to 30 - 40 MPH
• In the event of higher winds, bring sign in.
  
• Suitable for Indoor or Outdoor Use
• Fillable Base- use water or sand to increase the weight up to 25 LBS
• Stable, Heavy, BLUE Durable Base: 18" Diameter x 12" in Height
  
• Large 3" Wheels allow for easy moving over rough pavement or up and down steps
• BLACK Single Post Options: 48" or 58" in Height
• Pre-Drilled Holes Accepts Sign Panels 9" x 12" to 24" x 24", and 12" x 36"
• Stabilizing mounting plates keep sign panels from wobbling in the wind
• SIGN PANELS NOT INCLUDED
• Two-sided viewing
• Sidewalk Base is made of Technopolymer Plastic which is ding & rust-proof
• Finial on top of pole provides a comfortable handle for moving around
• No Tools Required, sets up in 60+ Seconds
  
• Single packed with an easy-to-understand instruction sheet!

• Single Post Portable Sidewalk Sign Holder
• Plastic Fillable Base Sidewalk Sign
• Budget friendly Sign Stand is ideal for Traffic, Safety, Parking Signs and more
  
• Stable in wind gusts up to 30 - 40 MPH
• In the event of higher winds, bring sign in.
  
• Suitable for Indoor or Outdoor Use
• Fillable Base- use water or sand to increase the weight up to 25 LBS
• Stable, Heavy, BLACK Durable Base: 18" Diameter x 12" in Height
  
• Large 3" Wheels allow for easy moving over rough pavement or up and down steps
• BLACK Single Post Options: 48" or 58" in Height
• Pre-Drilled Holes Accepts Sign Panels 9" x 12" to 24" x 24", and 12" x 36"
• Stabilizing mounting plates keep sign panels from wobbling in the wind
• SIGN PANELS NOT INCLUDED
• Two-sided viewing
• Sidewalk Base is made of Technopolymer Plastic which is ding & rust-proof
• Finial on top of pole provides a comfortable handle for moving around
• No Tools Required, sets up in 60+ Seconds
  
• Single packed with an easy-to-understand instruction sheet!

• Pavement Sign Holder
• Plastic Fillable Base Sidewalk Sign Holder
  
• Steel Shock Springs flex for wind gusts
  
• Double Sided Sign Stand
  
• Two Separate Aluminum Snap Open Frames
• Quick-Changing, all 4 frame rails snap open for easy poster changes
• Safety corners guarantee maximum safety on the pavement.
• Fits TWO 30" Wide x 40" High Posters
  
• Viewable Area: 29.8" Wide x 39.8" High
• Snap Open Frame System will accepts posters up to 1/16" thick
• Water Wick (Rubber Seal) around the Frame Protects Posters against inclement weather
• Poster inserted should be printed for outdoor use (consult your printer or local sign company)
  
• Stable, Heavy, Durable
  
• Standing Sign Holder Suitable for Indoor or Outdoor Use
• Fillable Base- use water or sand to make base heavier
  
• Curb Sign Base is made of Polystyrene Plastic
• Finish: Black or Silver
• Two Non-Glare Overlays are included to protect your graphic.
• Assembly Tools Included
• Packed with an easy-to-understand instruction sheet!

• Wind-Proof Sidewalk Curb Sign Holder
• Fits Posters and Signs 22 x 28 in size
• Side frame rails snap open to load poster
• Aluminum construction with Radius Corners
• Frame Finish: Satin Silver
• Black molded base can store sand or water for weight
• Flexes to withstand strong wind gusts
• Built-in wheels roll for easy moving
• Dent-resistant fluted white polypropylene backer
• Two-sided design (can display 2 separate 22" x 28" posters)
• Pavement Sign Holder with Sleek, Contemporary Styling
• No Tools Required!
• Designed for Outdoor Use or Can be Used for Indoor Locations

• Outdoor Sign Stand
• Tall Wind Resistant Jumbo Curb Stand
• Durable Aluminum Display Frame Construction
• Sleek, contemporary styling
• Side frame rails snap open to load poster
• The top frame is completely enclosed for added moisture resistance
• SIDE ONE: Fits 28" Wide x 67" High Posters
• SIDE TWO: Fits (3) 28" Wide x 22" High Posters
• Black Radius Frame Corners eliminates corner points
• Frame Finish: Satin Silver
• Gray molded base can store sand or water for weight
• Flexes to withstand strong wind gusts
• Built-in wheels roll for easy moving
• Dent-resistant fluted polypropylene back
• Frame Profile Width: 1 3/4"
• Max Insert Thickness: .060"
• Base Dimensions: 25”W x 6.2”H x 27”D
• Base Fill Capacity: 9.45 Gal.
• Base Weight when Filled with Water: 79 LBS
• No Tools Required!
• Designed for Outdoor and Indoor Signage applications

• Street Master™ Illuminated LED Pavement Rolling Sign Holder
• Aluminum Frame Construction
• Stable, Heavy, Durable, Illuminated LED frame
• ILLUMINATES AT NIGHT or DIM AREAS FOR MAXIMUM ADVERTISING Visibility
• Insert the poster upwards into metal poster clips, found under the polycarbonate windows.
  
• Upper frame is LOCKABLE & WEATHER-PROOF!
• Accepts 2 Posters 23.38 Wide x 33.11 High (A1 SIZE)
• Inside the frame are rubber gasket seals to help protect your poster from water damage.
  
• Finish: Grey rolling base, with Silver Trim and Black Painted Borders onto the UV poly-carbonate covers
• A lockable frame design & battery compartment keep your poster and battery safe.
• Rechargeable battery (2kg 26.6 Volt, 12 Volt DC, 10A lithium model)
• Battery CAN NOT be charged while in the product itself.
• Charging Unit Included.
• BATTERY WILL BE SHIPPED AT FULL CHARGE CAPACITY!
  
• 2-Sided Viewing with Illuminated LED lighting
• Adjust the brightness between 2 modes.
  
• 12 locks altogether on this display. Look at additional images and instruction sheet to see where!
  
• Easily change posters or advertisements with the included poster clips.
• Keep your frame from falling when changing posters with the Elastic Ropes that hinges at the cover!
  
• Non-Glare Protective Overlays for Each Frame Side are Included
  
• Lockable Ultra-Violet (UV) Poly-Carbonate cover on both sides
• 40mm Wide printed black border around viewable area to conceal hardware and lighting
• Easily to move anywhere with the wheels and handle feature.
  
• Fillable Base: use water or sand to make base heavier
• Approx Weight when filled with water: 88 lbs
  
• Overall Pavement Stand Height: 48"
• Packed in 3 boxes, with an easy-to-understand instructions

SEE INSTRUCTION SHEET below
for FULL PRODUCT DATA SPECS

• Pavement Sign with Fillable Weighted Water Base and Flexible Springs
  
• Advertise with a big impact on the streets
• PRINT BANNER ON VINYL MATERIAL TO MAKE YOUR BANNER WATER RESISTANT!
  
• O-RINGS provide security to your banners.
• Frame is finished with stain free outdoor powder coating.
• Fits ONE 30" Wide x 40" High Vinyl Banner - 2 SIDED
  
• Leave at least 1 1/4" Border ALL-AROUND the Banner to allow for O-Rings
  
• Overall Height: 53"
• Two-sided viewing
• It consists of 2 main articles; the frame and weighted base
• Finish: Black and Silver
• Easy to move around with the rolling fillable water base
  
• The spring connectors stabilize the position of poster
• Fillable Water base weighs 77 lbs when full to support the curb sign against high wind gusts.
• Suitable for windy and rainy outdoor conditions.
• Banner installed should be printed for outdoor use (consult your printer or local sign company)
• Curb Sign Base is made of Polystyrene Plastic
• Some Basic Tools Are Required.
• Single packed with an easy-to-understand instruction sheet!

• Pavement Sign with Fillable Weighted Water Base and Flexible Springs
  
• Advertise with a big impact on the streets
• PRINT BANNER ON VINYL MATERIAL TO MAKE YOUR BANNER WATER RESISTANT!
  
• O-RINGS provide security to your banners.
• Frame is finished with stain free outdoor powder coating.
• Fits ONE 24" Wide x 36" High Vinyl Banner - 2 SIDED
  
• Leave at least 1 1/4" Border ALL-AROUND the Banner to allow for O-Rings
  
• Overall Height: 49"
• Two-sided viewing
• It consists of 2 main articles; the frame and weighted base
• Finish: Black and Silver
• Easy to move around with the rolling fillable water base
  
• The spring connectors stabilize the position of poster
• Fillable Water base weighs 77 lbs when full to support the curb sign against high wind gusts.
• Suitable for windy and rainy outdoor conditions.
• Banner installed should be printed for outdoor use (consult your printer or local sign company)
• Curb Sign Base is made of Polystyrene Plastic
• Some Basic Tools Are Required.
• Single packed with an easy-to-understand instruction sheet!

• Mini Wind-Proof Sidewalk Curb Sign Holder
• Display Signs and Posters: Size 24 x 36
• Sleek, contemporary styling
• Aluminum Snap Frames with Rounded Corners
• Round Corners eliminate corner points
• Double-Sided Snap Frame
• Two-sided design (can display 2 separate 24" x 36" posters)
• 2 Side frame rails snap open to front load poster
• Snap Frame Finish: Gloss Black or Satin Silver
• Rounded Corners: Black
  
• Black Molded Polyethylene Base / add sand or water for weight
• Flexes to withstand strong wind gusts
• Built-in wheels roll for easy moving
• Dent-resistant White Fluted Polypropylene Frame Back
• Tool Free Assembly
• Mini Sidewalk Sign Stand Designed for Outdoor Use

• Sidewalk Sign Holder
• Holds 28x44 Poster Size
• Side frame rails snap open to load poster
• The top frame is completely enclosed for added moisture resistance
• Aluminum construction with Radius Corners eliminates corner points
• Frame Finish: Gloss Black or Satin Silver
• Gray molded base can store sand or water for weight
• Flexes to withstand strong wind gusts
• Built-in wheels roll for easy moving
• Dent-resistant fluted polypropylene back
• Sleek, contemporary styling
• No Tools Required!
• Cub Signage Stand Designed for Outdoor Use